Our Products

Home – Products

ALL MSEDCL APPROVED PRODUCTS

Battery Charger

Battery Charger

Description

We are offering MSEDCL approved and Non-approved Float cum Boost 30V 100 AH Battery Charger with integral distribution board suitable for 30V 100 AH lead acid stationary battery set.

Sr. No Description of Item Offered Value
1 Supply Voltage 240V ±20%, Single Phase, 50Hz
2 Charger Output Voltage 30V to 42V DC
3 Charger Output Current Battery Terminals – 10 Amps max
Load Terminals – 6 Amps max
4 Functions Auto Mode: Fully Automatic voltage control
Manual: Different DC voltage for different level
Float cum Boost charger (MSEDCL Approved)
5 Mechanical Dimensions 1200 H x 600 L x 500 D
6 Weight Unpacked Weight approx. 70 Kg

Battery Set

Battery Charger

Description

We are offering MSEDCL approved and Non approved Battery set. One battery set contain 15 battery

Sr. No Description of Item Offered Value
1 Battery Make Ajintha Industries
2 Battery Type Lead Acid Battery
3 Rating 2 V 100 AH /200 AH
4 Mechanical Dimensions 172 L X 143W X 327H
5 Dray Battery Weight 8kg
6 Weight of with acid 14 Kg

Jumbo Battery

Battery Charger

Description

We are offering jumbo batteries

Sr. No Description of Item Offered Value
1 Battery Make Ajintha Industries
2 Battery Type Lead Acid Battery
3 Nominal Capacity 180 AH
4 Mechanical Dimensions 520 L X 283 W X 330 H
5 Weight 53kg

IT Battery

Battery Charger

Description

We are offering IT batteries

Sr. No Description of Item Offered Value
1 Battery Make Ajintha Industries
2 Battery Type Lead Acid Battery
3 Nominal Capacity 150/180/220 AH
4 Mechanical Dimensions 480 L X 155 W X 336 H
5 Weight 67 Kg(Differ As per Capacity )

LT Distribution Box

Battery Charger

Description

We are offering LT Distribution Box

Sr. No Technical Specification
1 11 KV Feeder Pillar 2 Way
2 11 KV Feeder Pillar 4 Way
3 L.T. Dist. Boxes 25/63 KVA with MCCB
4 L.T. Dist. Boxes 25/63 KVA with KITKAT
5 L.T. Dist. Boxes 100 KVA with MCCB
6 L.T. Dist. Boxes 100 KVA with KITKAT
7 L.T. Dist. Boxes 200 KVA with MCCB
8 L.T. Dist. Boxes 200 KVA with KITKAT

AC Distribution Board Type ‘B’

Battery Charger

Description

We are offering MSDCL approved AC Distribution Board Type ‘B’

Sr. No Technical Specification
1 11 KV Feeder Pillar 2 Way
2 11 KV Feeder Pillar 4 Way
3 L.T. Dist. Boxes 25/63 KVA with MCCB
4 L.T. Dist. Boxes 25/63 KVA with KITKAT
5 L.T. Dist. Boxes 100 KVA with MCCB
6 L.T. Dist. Boxes 100 KVA with KITKAT
7 L.T. Dist. Boxes 200 KVA with MCCB
8 L.T. Dist. Boxes 200 KVA with KITKAT

Isolator

11 KV Single Break Isolator

11 KV Single Break Isolator

33 KV Single Break Isolator

33 KV Single Break Isolator

Description

Isolator’s 11/22/33kv 400 to 1600 Amps central brake, Centre post rotating & tilting with and without earth switch and auxiliary contact with electro mechanically interlock arrangements. 33 kV outdoor. Triple pole three solid core insulators as per pole rotating type suitable for horizontal mounting with complete operating mechanism.

Description of Item Technical Specification
Type of Isolator Double break rotating banging type isolator with or without earth blade. (Approved Make)
Nominal System voltage 11kv,33Kv
High-test voltage 12kv,36Kv
Rated Current 400 Amp/800
Contact Fixed Contact & Moving Contact

Circuit Breaker

Battery Charger

Description

A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage caused by excess current from an overload or short circuit. Equipment used for breaking

Sr. No Description of Item Offered Value
1 Type of circuit breaker air circuit breakers, oil circuit breakers, vacuum
2 Make PCE, ABB, Bush, CG
3 Nominal System voltage 11KV, 33KV, 132KV, 400kv, 465KV.
4 Types Indoor and Outdoor
5 Rated Current 400 Amp/ 800Amp

Current Transformer

Battery Charger

Description

A current transformer is a type of transformer that is used to reduce or multiply an alternating current. It produces a current in its secondary which is proportional to the current in its primary. Current transformers, along with voltage or potential transformers, are instrument transformers. The CTs shall be of ring type or window type varnished, fiberglass tape insulated or cast resin, air-cooled type. Only super enameled electrolytic grade copper wires shall be used.

Sr. No Description of Item Ratio
1 11kV Current transformer 400-200/5-5A & 600– 300 / 5-5A
2 22kV Current transformer 200-100/1-1A
3 33kV Current transformer 400-200-100/1-1-1A & 800-400-200/1-1-1A
4 400kv Current transformer 2000-1000-500/1-1-1A

Potential Transformer

Battery Charger

Description

Potential transformer is a voltage step-down transformer which reduces the voltage of a high voltage circuit to a lower level for the purpose of measurement. Majorly these are classified into outdoor and indoor potential transformers.

Sr. No Description of Item Ratio
1 11kV Current transformer 400-200/5-5 & 600 - 300 / 5 – 5A
2 22kV Current transformer 200-100/1-1
3 33kV Current transformer 400-200-100/1-1-1 & 800-400-200/1-1-1

Air Break Switch Set

11 Kv A B Switch

11 KV Single Break Isolator

33Kv A B Switch

33 KV Single Break Isolator

Description

We deal in Air break switch 11/22/33kv 200 Amp to 800 Amp as per MSEDCL Specification. Outdoor type Triple Pole three insulators per pole tilting type gange operated air break switch suitable for horizontal /Vertical mounting with complete operating mechanism. All type of A B Switch like
1. Single break rotating type
2. Double break rotating type
3. Two post tiling/ rocking type
4. Three post tiling/ rocking type

Description of Item Offered Value
Type of A B Switch Double break rotating banging type isolator with or without earth blade. (Approved Make)
Mounting 11kv,33Kv
Nominal System voltage 12kv,36Kv
High-test voltage 400 Amp/800
Rated Current Fixed Contact & Moving Contact

Drop - Fuse set & Accessories

Battery Charger

Description

We supply pole operated DO Fuse 11/22/33kv 200 Amps as per MSEDCL Specification. DO fuse outdoor vertical mounting expulsion type. Each pole consists of MS base Post Type Insulator.

Sr. No Description of Item Offered Value
1 Rated voltage 11kv /33 KV
2 Rated Normal Current 100A/200A
3 Rated Frequency 50 HZ
4 Power frequency Voltage for one 28/32Kv & 70/80Kv (RMS)

Lugs

Battery Charger

Description

We supply all type of Aluminum & Copper Lugs.
Aluminum Lugs: - Ring type, Pin Type, Long Barrel type from size 2.5sqmm to 1000 sq.mm
Aluminum Lugs: - Ring type, Pin Type, Fork type from size 2.5 sq.mm to 800 sq.mm

Meters

Battery Charger

Description

We supply all type of meter ammeter, voltmeter, power factor meter, Power meter in analog and digital.

Megger

Battery Charger

Description

we supply all range of insulation tester (meggar) earth tester (Digital & Analogue ), Tong Tester (Digital & Analogue), tong tester (Digital), Digital multi meter, Phase Sequence indicator,Power factor meter

Rated Voltage Rated Resistance
500 Volts 500 Mega Ohm
1000 Volts 1000 Mega Ohm
1000 Volts 2500 Mega Ohm
2500 Volts 5000 Mega Ohm

Cable Glands

Battery Charger

Description

We supply cable gland in single and double compression type

Size Inch Size mm Cable Size Core Size Size Inch Size mm Cable Size
3/8" 10 1.5 2 1.3/4" 45 95/120
1/2" 12 1.5 3 2" 50 150/185
5/8" 16 1.5/2.5 3 by 4 2.1/4" 57 185
3/4" 19 1.5/2.5/4 5,6,7/4/4 2.1/2" 63 240
7/8" 22 4 by 6 6 by 4 2.3/4" 70 300
1" 25 2.5/10 7,10,12,4 3" 75 400
1.1/8" 28 4 by 6 3,4 3.1/4" 82 400
1.1/4" 32 25/35 3.5/4/3.5/4 3.1/2" 88 500
1.3/8" 35 50 3.5/4 4" 100 600

RSJ Pole

Battery Charger

Description

We are a leading organization engaged in offering RSJ pole to our esteemed clients. These are sourced from reliable and authorized vendors and are available at market leading prices. Our range of RSJ pole Comes in Different weight, length and other specification’s to suit the demands of government and industrial sectors.

Single Core Wires
(0.5 sq.mm to 240 sq.mm)
Flexible Power / Control Cables
(up to 100 core)
Flexible Armored Cable
EMC Compliant Power / Control Cable
Pendant Application Cable
Drum Reeling & Unreeling Cable
Heat Resistance Cables
Instrumentation Cable
(0.5 to 1.5 sq.mm | Pairs up to 24 | Triad up to 16)
Compensating cable
(Range of temp: 70 to 200 C
Bus Cables
Modbus/ Profibus/Can BUS etc.

Instrumentation Cable Instrumentation / Single Cable

Battery Charger

Description

Cores, paired, triades etc. with aluminum myler tape for individual & overall shielding up to pairs general PVC/ heat resistance PVC insulated.
Voltage Grade:300 / 500 V
Cross sectional Area : 0.5sq.mm to 2.5mm Type of conductor : copper
Type of insulation : PVC /HR PVC
Inner sheath : Extruded PVC (st - 1) or (st - 2)
Outer Sheath : Extruded PVC / FR / FRLS / Zero Halogen (LSZH) (ST-1) or (ST-2) Application - Instrumentation cable plays a vital role in measurement and control .

End Termination kit for Elastomer Cables

Battery Charger

Description

End termination kit for elastomer cable use in all climate conditions. Covers application on single core and multi core cable up to 33Kv.

LT Cable & Jointing

LT Cable

LT Cable

Straight Through Joint Kit

Straight Through Joint Kit

Quick Cable Preparation

Quick Cable Preparation

Rubber Cable ST Jointing

Rubber Cable ST Jointing

Description

Core: Single / Multi Core Cable. Single core cable up to 1000 sq.mm
Voltage grade: 650/1100 V
Cross sectional area: Single core cable - up to 1000 sq.mm
Conductor: Copper / Aluminum
Insulation: HRPVC / PVC / XLPE / Halogen free
Inner Sheath: Tapped / Extruded with suitable material
Armour: Galvanized steel
Type: Round wire / Flat strip
Outer Sheath: Extruded PVC / FR / FRLS / Zero Halogen (LSZH)(ST-1) or (ST-2)

Straight Through Joint Kit

In LV multi-core cable joints, individual connectors are insulated by shrinkable tubes. Galvanized steel casing provides mechanical protection against dig in damages. Corrosion and moisture protection is achieved in the same way as in HT joints.

Quick Cable Preparation

Covers all types of conductors and connection shapes. Compact dimensions with heat shrinkable type insulating tubes.

Rubber Cables ST Jointing

Rubber Cable ST Jointing - straight joints for screened rubber insulated cables 3.3kV up to 11kV. Tinned mining connectors are used for joining service core and protection cores. Screens and their insulation are re-constructed on protection cores with the use of semiconducting self-bound tapes.

Horn Gap Fuse

Battery Charger

Description

11/22/33Kv outdoor Horn Gap fuse with Channel base as per MSEDCL Specification

Sr. No Description of Item Offered Value
1 Types of Horn Gap fuse Channel type HG Fuse
2 Nominal System Voltage 11KV
3 Highest System Voltage 12kv
4 Rated Current 100Amps
5 Types of Mounting Suitable for vertical mounting

Lighting Arresters

Battery Charger

Description

The main function of Lightning arresters is to protect the apparatus from the lightning strike’s Lighting arrestors are rated from 1.1/6.6/9/18/30Kv etc.

Sr. No Description of Item Offered Value
1 Types of Lighting Arrester Distribution Class/ Station Class metal
2 Rated Voltage 9Kv/30 Kv
3 Nominal discharge current 5KA/10KA
4 Max. continuous operating voltage 7.2Kv / 25Kv

Insulators

Battery Charger

Description

Disc insulators are utilized in overhead electrical wiring for supporting overhead power lines & radio antennas. The discs are connected in a horizontal position. And hence disc insulators are available in 45KN,70KN,90KN & 120KN. Fittings of disc Insulator are available in two types: 1. Ball & Socket type 2. Tongue & Clavis

Sr. No Description of Item Offered Value
1 Creepage distance minimum 320mm
2 Nominal System Voltage 11Kv
3 Highest System Voltage 12Kv
4 Electro mechanical Failing Load 45Kn/70Kn
5 Spacing of insulator 145mm
6 Weight of insulator 4.300Kgs/4.500Kgs
7 Color Brown, Green

Pin Insulator

Battery Charger

Description

Pin Insulators are available in Ratings of 11/22/33 KV. Mechanical load of Pin insulator is 5KN or 10KN.these are installed on top of poles in order to insulators are efficient in Resisting the current flow

Sr. No Description of Item Offered Value for 11KV Offered Value for 33KV
1 Nominal System Voltage 11Kv 33Kv
2 Highest System Voltage 36KV 36KV
3 Minimum creepage distance 230mm 580mm
4 Minimum failing load 5Kn 10Kn
5 Height 215 215
6 Outside Diameter 250 250
7 Color Brown Brown

Post Insulators

Battery Charger

Description

Post Insulators are generally used manufacturing of isolators, AB Switch and in dropout fuse set & also to insulate the sub-station Structure as post. the post insulator come in Rating of 11/22/33 KV class of many reputed makes. The Insulators are threaded at the bottom; similar to the thread of GI Spindle for Assembly.

Sr. No Description of Item Offered Value
1 Types of Insulators Pedestal Type
2 Height of Insulator in mm 254mm
3 Diameter of Insulating Part in mm 152mm
4 Mass of Insulator in Kgs 4.3Kgs
5 Minimum Creepage Distance in mm 320mm

Polymer Insulators

Battery Charger

Description

we supply all types of polymers pin insulators (11Kv & 33Kv ) & Disc Insulators from 45 Kn to 160 Kn as per the requirement. A polymer insulator has two parts, one is glass fiber reinforced epoxy resin rod-shaped core and the other is silicone rubber or EPDM (Ethylene Propylene Diene Monomer) made weather sheds.

Sr. No Description of Item Offered Value for Pin Offered Value for Disc
1 Mechanical Characteristic Failing load 5KN /10KN Failing load 45/70/90K N
2 1 min Power frequency withstand test (Dry) 75 KV 70 KV
3 Creepage Distance 1000mm 320mm

LT Shackle Insulator

Battery Charger

Description

Shackle Insulators are used at the end of distribution line or at sharp turns where there is excessive tensile load on the line. The insulator are bolted to the cross - arm of the pole.

Sr. No Description of Item Offered Value
1 Wet 1 min power frequency withstand vtg 10KV
2 Minimum Failing load 11.5KN
3 Length 75mm
4 Width 90mm
4 Creepage Distance 65mm

LT/HT Stay Insulators

Battery Charger

Description

Stay insulator is a type of low voltage insulator designed to fasten and counterweight the dead end pole by connecting with stay wire or guy grip, it is also called stay type insulator.

Sr. No Description of Item Offered Value
1 1 min power frequency withstand test (Wet) 15KV
2 Minimum Failing load 53KN
3 Length 110mm
4 Width 75mm
4 Creepage Distance 48mm

Hardware’s
1. Tension hardware’s

Battery Charger

Description

Two type of hardware used tension and suspension. Tension hardware are of single, two, three & four bolted and more suspension also varies from the size of conductor. The hardware are manufactured in cast iron (hot dip galvanized) aluminum casting (aluminum alloy ) & malleable casting

Sr. No Description of Item Offered Value
1 Material Description Hardware fitting for different conductor
2 Ball & Socket Designation 16mm
3 Breaking load of hardware 30KN
4 Material Mild/ Forged steel, Hot dip Galvanized
4 Gross weight of each packing 50 Kg

2. GI Pin

Battery Charger

Description

GI pin 11/22/33 KV for power conductor suitable for Over-head transmission lines and sub-stations. The pins shall be as per relevant figure indicated in IS 2486 (part II) having stalk length of 300mm for 33KV & 165 mm for 11KV GI Pin and shank length of 150 mm with minimum failing load of 10kN for 33KV & 5kN for 11KV GI Pin with small heads and shall match with the pin type insulators with cemented zinc thimble having similar threads

Sr. No Description of Item Offered Value
1 Material Description Hardware fitting for Insulator
2 Weight 500Gm,700Gm/1.800Kg
3 Breaking load of hardware 30KN
4 Gross weight of each packing 50KG
4 Type of packing Double Gunny Bags

3. Suspension Hardware

Battery Charger

Description

We are offering our client an excellent quality range of disc hardware fitting, which are made from high grade quality raw materials. These 11Kv Disc hardware fitting which are made from high grade quality raw materials. These 11Kv Disc Hardware fittings can be customized as per our customers specification.

4. LT Shackle Hardware

Battery Charger

Description

we are one of the prominent suppliers of LT metal part. Our Product are available in different dimensions the range is acknowledged for Its feature such as superior performance, reliability, accuracy and durability.

Sr. No Description of Item Offered Value
1 Size of straps 30*3mm -200mm
2 Dia of bolts 12mm
3 Length of bolts 120mm
4 Thickness of bolts head 8mm

5. T Conductor & Terminal Connectors

Battery Charger

Description

T Connectors / Isolators Pad / CT Clamp / PT Clamp :
Being a quality oriented organization; we are involved in offering a wide range of electric T Connectors. these devices are engineered using best available technologies. Owing to finest quality and purpose specific construction , these devices are widely recommended by various clients.

Our devices are extensively acclaimed for safe usage and high efficiency. These can be availed at cost effective rates. All the conductor are of aluminum casting / ally PT clamp ,T Connectors. Stud type terminal connectors parallel and grounding connectors. the size of connectors very from the size of connectors vary from the size of conductor.

6. Wedge Connector

Battery Charger

Description

We provide a wide range of high quality wedge / UDC (universal distribution connector) Connector new. These are manufactured using quality basic material and used for sub station & distribution line.

Further, these wedge / UDC Connector are also known for same functioning like PG Clamps.

7. Turfer & Come alone Clamp

Battery Charger

Description

We have a wide range of terfers & Come alone clamp these are used in electrical line. Erection & Maintenance , tensioning of belts, cable etc boiler erection,guy rope holding, shunting wagons and locomotives, pipe laying, loading and unloading and all sorts of handling work.

Model M-7 M-15N M-20N M-30N M-50
Capacity (Kg) Pulling 1250 2600 3000 5200 8000
Lifting 750 1600 2000 3200 5000
Effort at full load(Kg) 30 40 42 60 60

D.O. Operating/ Discharge Rod

Battery Charger

Description

We offer operating and discharge pole rod in there /four selection or telescopic type with clamps of aluminum brass/copper. Both discharging and operating poles are types tested and are available from 11KV to 220KV system voltage made of fiberglass and from solid bamboo

Aluminum Conductors

Aluminum Conductors Aluminum Conductors Coil

Description

We deal in all varieties of HT & LT distribution and transmission line aluminum conductors, ACSR, AAC, AAAC type Copper Conductors of various size are also available. These are fabricated using quality raw material that is procured from reliable vendors. Owing to its quality our AAC, AAAC, ACSR Conductors are supplied to various electricity boards all across the country.

Material specification are as below:

Conductor Size Al/St/Dia Weight (Kg) Span (M) SAG at 75C No Win d(m) DC Resistance at 20C (Ohms/Km) Current carrying capacity at 45C (Amp)
AAC Ant 7/3.10 145 - - 0.5419 189
AAC Gnat 7/2.21 74 - - 1.066 120
AA Ladybird 7/2.79 117 - - 0.6689 165
ACSR Weasel 6/1/2.59 128 67 0.67 0.9077 170
ACSR Rabbit 6/1/3.35 214 67 0.68 0.5426 240
ACSR Moose 54/7/3.53 1998 380 10.7 0.0547 980

Wires
1. Barbed wire

Battery Charger

Description

We supply a wide range of stay wires & come alone & GI Wire that fabricated from quality raw material such as stainless steel mild steel and alloys

Sr. No Description of Item Offered Value
1 Size (dia) Line Wire 2.5mm=0.08mm Point wire 2.00mm = 0.08
2 Tensile strength 390 to 590 N / MM2
3 Minimum breaking load of completed barbed wire 3.7KN
4 Weight of galvanizing 108 to 125 gms/M
5 Method of galvanizing Hot dipped according to IS: 4826/1979
5 Weight of coating (Minimum) line Wire 247gm/M2

GI Wire

Battery Charger
Sr. No Description of Item Offered Value
1 Size (dia) 3.15mm,4mm,5mm
2 Tensile strength 440-550MPa
3 Coating (gms)/m2 270 (for 3.15mm) and 290
4 Type of galvanizing Hot dip
5 No. of dips 3 dips of 1 Min and 1dip of 1/2 min

Stay Wire

Battery Charger
Sr. No Description of Item Offered Value
1 Size (dia) 3.15mm,4mm,5mm
2 Lay Length 12 to 18 times
3 Tensile strength 45Kg/sq.mm
4 Minimum breaking load of completed barbed wire 2331Kg/3758Kg
5 Type of galvanizing Hot Dip
6 No. of Dips 3 dips of 1 Min and 1dip of 1/2 min

GI Flat

Battery Charger

Description

We are offering earthing material .it is available in various sizes as per requirement . Such as:
25mm * 3mm 25mm * 6mm 40mm * 5mm 50mm * 6mm 70mm * 8mm 75mm * 10mm

Earthing Material

Battery Charger

Description

Widely used and most suitable product for earthing of equipments. Major advantages is highly cost effective vis-à-vis use of salt coal dust .it reducesthe cost on excavation of earthpit. Resistance less than 0.52 ohm. Useful for earthpit material for sub-station . does not requirement for decades. no corrosion to earth strup wire ,plate etc. ones the pit is filled with earth powder in paste from ,it does not require any watering can be used under any soil conditions.

VCB Componen
1.Compact mechanism

Battery Charger

Description

A compact light weight construction , optimized to give minimum weight to KA ratio. A simple motor charged spring operating mechanism noted for its high performance reliability . A versatile mechanism capable of operating vacuum Interrupters of any type. trip free mechanism suitable for repeated auto reclosing duty .

2. Auxiliary Switch

Battery Charger

Description

These Switch can be used in vacuum circuit breaker. It having two type Drum type auxiliary switch and rotary type auxiliary switch. It can be stretched more number of contacts per switches any desired contact configuration from 2NO/2NC up to 12 NO / NC, is possible in one stack

3. Solenoid Coils

Battery Charger

Description

Solenoid coil will work with voltage in DC. We having different type of solenoid coil based on various applications. This coil is used in different 11KV,33KV breaker and other voltage breakers.

Sr. No Description of Item Offered Value
1 Voltage (VDC) VDC
2 Make BHEL, ABB, Siemens

4. Gear box mechanism

Battery Charger

Description

Circuit Breaker Motor Gears can be used in various M.V. switchgears and ring main units. With operating motor gearbox it can store energy to make-and-break the circuit breakers of the switchgears. The system consists of motor, gear driving device, control unit and wire plug-in unit. * Remote/local switching and local make-and-break of switches * local and remote indication of the status of load switches, earth switches and fuses * Plug-in type of wiring makes it easy for on-site installation

HT Cable

Aluminum Conductors

Cross Sectional View

Aluminum Conductors Coil

Description

Voltage Grade: 3.3 / 11 / 22 / 33 kV grade (E & UE)
No. of Cores: Single core or Three core
Cross Sectional Area: 25 sq.mm to 1000 sq.mm

Conductor: Copper / Aluminum
Conductor Screen: Semi-conducting compound
Insulation: XLPE

Armouring:
For Multicore Cables:
Material: Galvanized Steel
Type: Round Wire / Flat Strip

For Single Core Cables:
Material: Hard Drawn Aluminum
Type: Round Wire / Flat Strip

Outer Sheath: Extruded PVC / FR / FRLS / Zero Halogen (LSZH)
Core Identification: By Colored Tapes

Cable Size Range:
Single core cables: Generally up to 1000 sq.mm
Three core cables: Generally up to 400 sq.mm

Elastimold Termination Kit

LT Cable

Heat Shrinkable Outdoor
Termination Kit

Straight Through Joint Kit

Elastimold termination kit :

maximum reliability with of known factor, computer designed and applicable for superior temperature and stress management.

11KV (E) 3 Core Outdoor Termination kit suitable for AB Cable :

This are designed to provide the basic important function required for medium voltage.

HT Cable Accessories

3 Core HT XLPE straight through
Jointing Kit (Heat Shrink)

HT Cable Accessories 1

HT End termination (Heat Shrink)

HT Cable Accessories 2

Heat shrinkable termination system for XLPE cables up to 33kV incorporates special conductive breakout to prevent electrical discharges in between core at trifurcating point suitable for cable up to 400 sq.mm
Type: indoor & Outdoor End Termination

HT Cable Accessories

3 Core HT XLPE Straight through jointing kit (Heat Shrink)

The straight through heat shrinkable jointing kit Consist of -

Resistivity : 1 * 10^12 ohm-cm
Dielectric strength: 10KV/mm
Dielectric constant: 5 (Max)
For XLPE 50 to 630 sq.mm for 3 core and 70 to 1000 sq.mm for 1 core

3 Core/1 Core Indoor / Outdoor terminal suitable for XLPE / PVC cables up to 33KV

1. Cable outer sheath 2. Black mastic 3. GI house clips
4. Breakout 5. Stress grading mastic 6. Semi conductive tube
7. Insulating tubes 8. Stress control tube 9. Connector
10. Stress Grading Mastic 11. XLPE Insulation 12. Tinned copper wire mesh
13. Semicon 14. Copper tape screen 15. Tinned copper wire mesh
16. wire cannister 17. water sealing sleeve 18. Corrosion protection tube
19. solder tack 20. Bare copper braid 21. cable inner sheath
22. Armour support ring 23. Tinned copper wire mesh 24. Armour

Didn’t find Solution here?
Feel free to contact us,we’ll be happy to help.!

Contact Us Now
Scroll to Top